TKBA 40, SKF, Highly accurate v-belt pulley alignment tool

EAN code: 7316575861445

Brand SKF
Mfr Part No. TKBA 40
Acorn Code TKBA40-SKF
HS Code 8482 99 00 90
COO Sweden (SE)

The SKF Belt Alignment Tool TKBA 40 aligns V-belt pulleys in the grooves. V-guides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley. With only two components, a laser-emitting unit and a receiver unit, the belt alignment tool is easy to use and allows fast and accurate belt alignments. The three-dimensional target area on the receiver unit help the easy detection of misalignment as well as its nature; whether it is horizontal, vertical, parallel or a combination of all three.
• Powerful magnets allow fast and easy attachment
• Three-dimensional target area simplifies detection and correction of misalignments
• Facilitates simultaneous adjustment of tension and alignment
• V-guides included for a wide range of V-belt pulleys
• Aligns grooves of a V-belt pulley rather than its face, allowing optimum alignment of pulleys of unequal width or with dissimilar faces
• Special side adaptor for alignments of multi-ribbed and timing belt pulleys as well as sprockets is available as accessory


Product Attributes
Manufacturer Product Code TKBA 40
Basic Product Description Highly accurate v-belt pulley alignment tool
Contents 1
Weight (Kg) 1.2
Laser Type Red laser diode
Mounting Magnetic, groove mounted
Battery 2 x AAA Alkaline type IEC LR03
Laser wavelength 632 nm
Laser power <1 mW, class 2
Laser line length 3 m at 2 m
Measurement distance 50 mm to 6 m
Measurement accuracy angular Better than 0.02° at 2 m
Measurement accuracy offset Better than 0.5 mm
Housing Material Extruded aluminium
Component Size 1: 22mm, short rods (3 x pairs)
Component Size 2: 22mm, long rods (3 x pairs)
Component Size 3: 40mm, short rods (3 x pairs)
Component Size 4: 40mm, long rods (3 x pairs)
IP Rating IP 40
Operating Time 20
EAN code 7316575861445


Alternative Products

Other Products