Z 009, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316570221565
Z 305, SKF, Sealing washer, standard design
Washer, Steel
KM 25, SKF, Locknut
Nut, Steel, M 125x2, EAN code: 7316577011237
KM 33, SKF, Locknut
Nut, Steel, M 165x3, EAN code: 7316577011312
KMT 40, SKF, Precision Lock nut
Nut, Steel, M 200x3, EAN code: 7316577655189
KMTA 12, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 60x1.5, EAN code: 7316577655264
This item is not currently available from our stocks.
Despatch date information is on request.
TAN16, Timken, Lock nut
Nut, Steel, EAN code: 0053893001272
This item is not currently available from our stocks.
Despatch date information is on request.
W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
KM 22, Neutral, Locknut
Nut, Steel, M 110x2
KM 24, Neutral, Locknut
Nut, Steel, M 120x2
KMK 17, SKF, Lock nut with integral locking screw
Nut, Steel, M 85x2, EAN code: 7316570228083
KMK 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1, EAN code: 7316571483528
KMK 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 45x1.5, EAN code: 7316571106991
KML 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577055668
KMT 15, SKF, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 7316577655042
KMT 36, SKF, Precision Lock nut
Nut, Steel, M 180x3, EAN code: 7316577655165
MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
W 14, SKF, Locking washer
Washer, Steel, EAN code: 7316571385594
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
ZW 85X100, SKF, Spacing washer
Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.