KMT 5, SKF, Precision Lock nut
Nut, Steel, M 25x1.5, EAN code: 7316577662743
MB 19, Neutral, Locking washer
Tab Washer, Steel
MB 2, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757968
MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
MB 6, Neutral, Locking washer
Tab Washer, Steel
MB 7, Neutral, Locking washer
Tab Washer, Steel
MB 9, Neutral, Locking washer
Tab Washer, Steel
W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
Z 206 F, SKF, Sealing washers, F design
Washer, Steel
Z 307, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351230
ZW 80X90, SKF, Spacing washer
Washer, Steel, EAN code: 7316571385631
KML 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316570314472
KML 28, NKE, Locknut
Nut, Steel, M 140x2, EAN code: 9008745233371
KMTA 7, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 35x1.5, EAN code: 7316577655219
MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
MB 5, Neutral, Locking washer
Tab Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TAN15, Timken, Lock nut
Nut, Steel, EAN code: 0053893001227
This item is not currently available from our stocks.
Despatch date information is on request.
TAN20, Timken, Lock nut
Nut, Steel, EAN code: 0053893001395
TW112, Timken, Locking washer
Washer, Steel, EAN code: 0053893822075
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.