TW107, Timken, Locking washer
Washer, Steel, EAN code: 0053893822044
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
TW113, Timken, Locking washer
Washer, Steel, EAN code: 0053893822082
This item is not currently available from our stocks.
Despatch date information is on request.
TW114, Timken, Locking washer
Washer, Steel, EAN code: 0053893822099
TW110, Timken, Locking washer
Washer, Steel, EAN code: 0053893821320
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
KM 11, Timken, Locknut
Nut, Steel, M 55x2, EAN code: 0087796028555
TN12, Timken, Lock nut
Nut, Steel, EAN code: 0053893000978
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
TW120, Timken, Locking washer
Washer, Steel, EAN code: 0053893822129
TW140, Timken, Locking washer
Washer, Steel, EAN code: 0053893821344
TAN16, Timken, Lock nut
Nut, Steel, EAN code: 0053893001272
This item is not currently available from our stocks.
Despatch date information is on request.
TW112, Timken, Locking washer
Washer, Steel, EAN code: 0053893822075
This item is not currently available from our stocks.
Despatch date information is on request.
TW130, Timken, Locking washer
Washer, Steel, EAN code: 0053893822167
This item is not currently available from our stocks.
Despatch date information is on request.
TW134, Timken, Locking washer
Washer, Steel, EAN code: 0053893822181
MB 14, Timken, Locking washer
Tab Washer, Steel, EAN code: 0013992166968
MB 9, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028401
This item is not currently available from our stocks.
Despatch date information is on request.
HM 46 T, Timken, T lock/dismounting nut
Nut, Steel, Tr 230x4, EAN code: 0087796250932
This item is not currently available from our stocks.
Despatch date information is on request.
What types of locknuts and washers are available from Timken?
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.