AH 308, SKF, Withdrawal sleeve, basic design, ISO standards
Metric, Sleeve, M 45x1.5, EAN code: 7316577109217
$94.51
In stock
Metric, Sleeve, M 45x1.5, EAN code: 9008745744976
| Brand | NKE |
|---|---|
| Mfr Part No. | AH308 |
| Acorn Code | AH308-NKE |
| HS Code | 8482 99 00 90 |
| COO | Austria (AT) |
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. KM or HM lock nuts (Lock nuts requiring a keyway) with appropriate locking devices are suitable. Lock nuts are not supplied with the sleeve and must be ordered separately.
| Manufacturer Product Code | AH308 |
|---|---|
| Basic Product Description | Withdrawal sleeve |
| Measurement | Metric |
| UOM | Each |
| ID or length (mm) | 35 |
| OD or breadth (mm) | 45 |
| Width or height (mm) | 29 |
| Weight (kg) | 0.09 |
| Thread | M 45x1.5 |
| Holes for oil injection | Without |
| EAN code | 9008745744976 |
Metric, Sleeve, M 45x1.5, EAN code: 7316577109217
Metric, Sleeve, M 45x1.5, EAN code: 00747023155163
This item is not currently available from our stocks.
Despatch date information is on request.