Ambersil corrosion inhibitors

Ambersil offers a Corrosion Inhibitor that protects metallic parts and components. The waxy anti-corrosion treatment is for use on ferrous metals as a long-term protective coating. The other is a corrosion inhibitor spray suitable for protecting ferrous metals in humid conditions.

21-25 of 25 products
21-25 of 25 products
Filter Results

Filter Results

Filter

Keywords

Types

Stock

  • Just show products in stock (2)

Pack Size (Per Unit)

  • 400 ml (16)
  • 200 ltr (3)
  • 500 ml (3)
  • 25 ltr (2)
  • 5 ltr (1)

Food Grade

  • NSF H1 Registered (2)

Upper Operating Temperature

  • • Use in well ventilated area.
    • Remove any rust and scale with a wire brush. Ensure that the surface to be coated is clean, dry and free from grease.
    • Shake the can vigorously until the agitator ball is free and continue shaking for a further minute.
    • Shake the can periodically during application.
    • Apply in light, even coats - best results are obtained with 2 - 3 light coats rather than one heavy coat.
    • Additional coats can be applied after 15 - 20 minutes.
    • When spraying is finished, clean the aerosol valve by turning the can upside
    down and spray until only propellant escapes.
    • Do not use on the inside of water storage tanks.
    • Remove prior to welding. (1)